T Slot Track Steel
Aluminium T-slot Track
Steel T Slot Rail Track

Regular T-slot nuts are inserted from the top or the bottom of the profile. Roll-in T-slot nut are rolled into the slot of the profile For use with our 25mm, 30mm, and 40 mm profiles. Works with standard 3/4' x 3/8' miter gauges with or without a T-slot. Our track is great for shop built router tables that are not equipped to handle a miter gauge. You can add a miter or sliding fixture to anything that can be routed out to fit the Miter T-Track work bench, table saw extensions, drill press tables, and band saw tables.

If you buy something through a link in our posts, we may get a small share of the sale.

High-end furniture fittings like sliding doors make people love their homes. A table saw is an important tool when making furniture, especially one with a T-slot track. Question is, exactly what is a T-slot track on a table saw?

Contents

What is a T-Slot Track on a Table Saw?
Related Questions

What is a T-Slot Track on a Table Saw?

A T-slot, also known as a T-track, is the slot that is created in a table saw. This is because the bolt that slides into the slot looks like an upside-down T. Table saws blades are circular. They are usually mounted under a bench or a table such that the blade projects up through the saw’s slot.

Choosing the Right T-Slot Track

T-slot tracks are available in a variety of lengths. The common measurement is 1 to 2 feet. It is possible to find T-slot tracks up to 12 feet. You can also special-order T-tracks of longer lengths depending on your needs.

The average width is about 1.9cm, and the thickness can be up to 1.2 cm. Some T-slot tracks can accommodate the hex head of an ordinary bolt, while others are built to hold a hex nut.

Some can accept number 6 or bigger screws and are stronger than those that can accommodate number 4 screws. A perfect T-track ought to have a fitting groove that helps to center the bit.

More Tips on Picking the Right T-Slot Track

Some tracks can fit miter slots on contractor table saws. They can either be used with the slot down or up, while some have to be adjusted the other way.

Glue grooves on the sides of T-tracks help provide a mechanical bond that is useful when gluing a T-track into a dado, which is the best way to attach a T-track to a dado. This is especially so where the material under the dado is not strong enough to withstand drilling.

How to Choose the Perfect T-Slot Track for your Needs

To choose the right T-slot track, consider the following:

The purpose of the T-track: This will determine what type of screws or bolts we will use and consequently, the type of T-slot track we choose to buy.
The material the T-slot track is made of: T-slot tracks could be made of aluminum, welded steel, or extruded aluminum. T-slot made from extruded aluminum is usually the best choice.
Your budget: If your budget is small, consider going for an extruded aluminum T-slot track. It reduces fabrication time and it costs less to make a frame and does not need to be painted regularly as it has a clear anodized protective finish.

How to Make a T-Slot Track

While some people may prefer to buy ready-made T-slot tracks, it is possible to make your own T-slot tracks. There are various materials that you may require: wood for making the track, one nut, and one bolt.

The tools required for the same include an entry-level table saw, good-quality wood glue, and clamps.

Step 1: Choose the Materials

This step involves selecting the materials you are going to use. It is recommended to use hardwood as it will last longer. You will also need a bolt and a nut.

Step 2: Set Blade Depth

Here, you set the depth on the blade. It needs to be slightly deeper than the head of the bolt.

Step 3: Cut Slots

Cut slots. Since the depth was already set, move the piece of wood to the center of the table saw blade. Run the saw through the trunk/wood and turn the wood around at the tip of your cut so that the opposite face gets to be against the fence.

Running the wood through the saw again helps to center the groove on the work piece. Repeat the process for each slot.

Step 4: Join the slots

Join the two slots together using the glue, being careful not to spill any glue into the slots.

Leave it to dry for several hours. Once it is dry, move the clamps from the wood and set the fence so that the blade cuts through the top of most of the slot, leaving a T-shaped slot.

Casino Royale is a 1967 British-American spy parody film originally produced by Columbia Pictures featuring an ensemble cast.It is loosely based on Ian Fleming's first James Bond novel.The film stars David Niven as the 'original' Bond, Sir James Bond 007.Forced out of retirement to investigate the deaths and disappearances of international spies, he soon battles the mysterious Dr. Noah and SMERSH. James Bond 007 - Casino Royale stream Deutsch HD Quality James Bond 007 - Casino Royale ist ein Agentenfilm aus dem Jahr 2006 von Martin Campbell mit Daniel Craig, Eva Green und Mads Mikkelsen. In James Bond 007. Directed by Val Guest, Ken Hughes, John Huston. With David Niven, Peter Sellers, Ursula Andress, Orson Welles. In an early spy spoof, aging Sir James Bond comes out of retirement to take on SMERSH. James Bond 007 - Casino Royale (2006) James.Bond.007.Casino.Royale.2006.German.DTS.DL.2160p.UHD.BluRay.HDR.x265-NIMA4K Eingetragen am um 00:02 Uhr. James Bond 007 - Casino Royale (2006) (Remux) James.Bond.007.Casino.Royale.2006.German.DTS.DL.2160p.UHD.BluRay.HDR.HEVC.Remux-NIMA4K Eingetragen am um 12.

Step 5: Tighten the jigs

Lastly, use a nut to tighten the jigs.

Related Questions

Before we finish, let’s answer a couple of last questions.

What is a T-Track Used For?

T-tracks have a variety of uses around a shop. It is easily attachable to the fence of a drill press, chop saw, or router table, where it provides a secure place for the attachment of feather boards, hold-down as well as stops, when cutting wood. Also, it can be added to fixtures with easily adjustable parts.

Conclusion

T-tracks are an important tool for carpentry. They can be bought ready-made and attached to table saws, or you can easily make one. It is important to take correct measurements when making a T-slot track.

Here you can find our T-slot plates produced from steel and cast aluminum, and accessories such as clamps and T-slot nuts.

Cast aluminum T-slot plates: Tolerance/Precision: +/- 0.01 mm /200 mm
Steel (C45) T-slot plates: Tolerance/Precision: +/- 0.05 mm /200 mm
Steel (C45) T-slot plates (shaped finely): Tolerance/Precision: +/- 0.01 mm /200 mm
Steel (C45) T-slot plates 'BigBlock' 50mm strong: Tolerance/Precision: +/- 0.01 mm /200 mm

Steel cross slot plate 4030 'X-Block'

$ 839.00*

Final price*, plus shipping

Cast aluminium T-slot plate 20' x 16'

$ 279.00*

Final price*, plus shipping

Cast aluminium T-slot plate 8' x 6'

$ 49.00*

Final price*, plus shipping

Bestseller

Cast aluminium T-slot plate 12' x 12'

$ 125.00*

Final price*, plus shipping

Cast aluminium T-slot plate 24' x 12'

$ 249.00*

Final price*, plus shipping

Cast aluminium T-slot plate 20' x 12'

$ 209.00*

T Slot Track Steel

Final price*, plus shipping

Cast aluminium T-slot

2021.05

88 Fortunes Slots Mod

Casino Night Background

Youtube Slots High Limit Jackpots

T Slot Track

Slots Lightning

777 Mega 7s Casino